Toro Spray Master Series - Cleaning; Cleaning the Engine and the Exhaust System Area; Cleaning the Debris from the Machine; Cleaning the Engine Debris Guard and Hydraulic-Oil Cooler

Cleaning
CleaningtheEngineand
theExhaustSystemArea
ServiceInterval:Aftereachuse(cleanmoreoften
whenoperatingthemachineindry
ordirtyconditions.)
CAUTION
Excessivedebrisaroundengine-airintake
andexhaustsystemareacancauseengine,
exhaustarea,andhydraulicsystemto
overheatwhichcancreatearehazard.
Cleanalldebrisfromengineandexhaust
systemarea.
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Cleanalldebrisfromtheengine,aroundengine
shrouding,fueltank,andexhaustsystemarea.
3.Wipeupanyexcessivegreaseoroilaroundthe
engineandexhaustsystemarea.
4.Cleanmufer-heatshieldsofalldebris,dirt,and
oil.
CleaningtheDebrisfrom
theMachine
ServiceInterval:Aftereachuse
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Cleanoffanydebrisorchemicalbuild-uponthe
machine,especiallythenozzles,sprayer-tank
opening,impeller,andthespraywandandits
holder.
CleaningtheEngineDebris
GuardandHydraulic-Oil
Cooler
ServiceInterval:Every80hours
1.Removethe2angelocknutsthatsecurethe
hydraulic-oilcoolertothemachine,andliftthe
cooler(Figure103).
g313103
Figure103
1.Carriagebolt
2.Flangelocknut
2.Useabrushordryclothtoremovedebrisfrom
theenginedebrisguardandthehydraulic-oil
cooler(Figure104).
g313102
Figure104
3.Assemblethehydraulic-oilcoolertothemachine
withthe2carriageboltsand2angelocknuts
(Figure103).
74