Toro Spray Master Series - Changing the Engine Oil and Engine-Oil Filter

g312873
Figure70
1.Fillerneck3.Maximumoillevel
(dipstick)
2.Dipstick
4.Minimumoillevel(dipstick)
5.Removethedipstickfromthelerneck,and
checkoillevelonthedipstick(Figure70).
Note:Theengineoillevelmustcoverthe
hatch-markedareaofthedipstick(Figure70).
6.Iftheoillevelislow,wipeofftheareaaroundthe
llerneckandaddthespeciedoil(Figure71)
untiltheoillevelisbetweenthehatchmarked
areasonthedipstick.
Important:Donotoverlltheenginewith
oil.
g312871
Figure71
ChangingtheEngineOil
andEngine-OilFilter
ServiceInterval:Aftertherst5hours
Every100hours(moreoftenundersevere
condition).
DrainingtheEngineOil
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Aligntheoil-drainhoseouttheleftsideofthe
machine,andremovetheplugfromthehose
(Figure72).
Note:Allowtheengineoiltodraincompletely.
g312973
Figure72
1.Drainhose3.Installthedrainpluginto
thehose.
2.Plug
3.Installthedrainplugintothehose,andtighten
theplug(Figure72).
Note:Wipecleananyresidualoil.
56