Toro Spray Master Series - Adjusting the Belt Tension

5.Withthetensionarmpulledawayfromthe
pulleysystem,routethenewbelt,startingatthe
hydraulic-motorpulley,thenaroundtheengine
pulleyandtensionerpulley(Figure92).
g313343
Figure92
1.Enginepulley3.Tensionerpulley
2.Belt4.Hydraulic-motorpulley
6.T ensionthebelt;refertoAdjustingtheBelt
Tension(page67).
7.Lowerthemachinefromthejackstands.
AdjustingtheBeltTension
1.Ensurethatthetensionarmandpulleymove
freely.
2.Whileholdingtheeyeboltfromrotating,tighten
thelocknutuntilthethreadlengthafterthe
adjustmentis32mm(1-1/4inches)asshown
inFigure93.
g313348
Figure93
67