Toro TXL 2000 - Attachment Handling Procedures

DrivingtheMachine
Usethetractioncontrolstomovethemachine.The
fartheryoumovethetractioncontrolsinanydirection,
thefasterthemachinemovesinthatdirection.
Releasethetractioncontrolstostopthemachine.
Thethrottlecontrolregulatestheenginespeedas
measuredinrpm(revolutionsperminute).Runthe
engineathighthrottleforbestperformance.You
can,however,usethetransportspeedcontrolinthe
InfoCentertooperatethemachineatlowerspeeds
andretainfullenginespeed;refertoSettingthe
MaximumTransportSpeed(page16).
ShuttingOfftheEngine
1.Parkthemachineonalevelsurfaceandlower
theloaderarms.
2.Disengagetheauxiliaryhydraulics.
3.Setthethrottletolowidle.
4.Iftheenginehasbeenworkinghardorishot,let
itidlefor5minutesbeforeturningthekeyswitch
totheOFFposition.
Note:Thishelpstocooltheenginebeforeyou
shutitoff.Inanemergency,youcanshutoff
theengineimmediately.
5.TurnthekeyswitchtotheOFFpositionand
removethekey.
CAUTION
Achildoruntrainedbystandercouldattempt
tooperatethetractionunitandbeinjured.
Removethekeyfromthekeyswitchwhen
leavingthetractionunit,evenifjustforafew
seconds.
UsingAttachments
Thisisamultipurposemachineintendedforusein
variousactivities.Itisdesignedtooperatesafely
withavarietyofT oro-manufacturedattachments,
eachofwhichperformsaspecializedfunction.Toro
acceptsnoliabilityformachinedamageorpersonal
injurythatresultsfromtheuseofothermanufacturers
attachments.Theuseracceptstheburdenofthese
risks.
ReadtheattachmentOperator’sManualbeforeyou
usetheattachment.
Important:Attachmentscanchangethestability
andtheoperatingcharacteristicsofthemachine.
InstallinganAttachment
Important:Beforeinstallingtheattachment,
ensurethatthemountplatesarefreeofanydirtor
debrisandthatthepinsrotatefreely.Ifthepins
donotrotatefreely,greasethem.
1.Positiontheattachmentonalevelsurfacewith
enoughspacebehindittoaccommodatethe
machine.
2.Rotatethequick-attachleversoutwardtoraise
thequick-attachpins(Figure28).
g215372
Figure28
1.Quick-attachlever
2.Attachmentmountplate
3.Starttheengine.
4.Tilttheattachmentmountplateforward.
5.Positionthemountplateintotheupperlipofthe
attachmentreceiverplate(Figure29).
g215373
Figure29
1.Mountplate2.Receiverplate
6.Raisetheloaderarmswhiletiltingbackthe
mountplateatthesametime.
23