Toro TXL 2000 - Changing the Hydraulic Fluid

ChangingtheHydraulic
Fluid
1.Parkthemachineonalevelsurface.
2.Raisetheloaderarmsandinstallthecylinder
locks.
3.Shutofftheengine,removethekey,andallow
theenginetocool.
4.Removethefrontcover;refertoRemovingthe
FrontCover(page32).
5.Removethehydraulic-tankcapanddipstick
(Figure82).
g263506
Figure82
1.Fillerneck2.Dipstick
6.Placealargedrainpaincapableofholding57L
(15USgallons)underthedrainplugonthefront
ofthemachine(Figure83).
g303493
Figure83
1.Drainplug
7.Removethedrainplugandallowtheoiltodrain
intothepan(Figure83).
8.Whentheoilisnisheddraining,installand
tightenthedrainplug.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
9.Fillthehydraulictankwithhydraulicuid;refer
toHydraulic-FluidSpecications(page49).
10.Starttheengineandletitrunforafewminutes.
11.Shutofftheengineandremovethekey.
12.Checkthehydraulic-uidlevelandadduidto
llthetankifnecessary;refertoHydraulic-Fluid
Specications(page49).
13.Installthefrontcover.
52