year
Fb_ menu n_v/9"_t/on /?Jst/uot/ons, see C/>_pte_4
Sdecting the menu language
You can choose t]'om three dit'f_rent Ianguages (EngIish, French
and Spanish) tk_rthe on-screen display of adjusmaent menus and
messages. (The TV Guide On Screen meuas are in English,
regardless of the language selected in this menu.)
To select the menu language:
1. Press MENU and open the PREFERENCES menu.
2. Highlight MENU LANGUAGE and press ENTER.
3. Highlight your prelbrred merm language in the menu
sidebar and press ENTER.
:¢ ;%
4. Press EXIT to close the PREFERENCES menu.
Configuring the antenna input
SOUrCeS
To configure the ANT 1 and ANT 2 input sources:
1. Press MENU and open d_e SETUP menu.
2. Highligh_ INSTALLATION and press ENTER. (A new see
of INSTALLB2FION menu icons will appear on-screen, as
shown in step 3 below.)
_Navigate _6Selec_ _Back _Exit
3. Open the TERRESTRIAL menu, highlight INPUT
CONFIGURATION, and press ENTER.
Note: f/_eTFRRES'TR/ALmenum_ynot beac'c'essib/e
Cite/nswillbe '_v_yedout':)b someklst_mt'es(for ex3mph,ff
a cableboxisconnectedto theANT 1h?put or/lone of the
VIDEOmodesis thec_e_ntinput c/u//ngTVGuiUeOn
Screensetup2
{€_Naviga_e _SeJeot _3ack A!_ExJt
4. Press _ to selec_ the input source (Cable or antenna) tbr the
ANT 1 input on the TV.
Note: It a c';',b/ebox h c:onnectedto theA/VT_i/_put&_ri/_c_
TVGuide On.S'e/_ensetup,the entire?-_RRE.S'TR/ALmenu
will notbe acces:_ibhinohJclinutheinput soumeforANT 7,
whM?willautorna_k-a//ydisphty"C_b/eBox"
5. Press _' and then _ to selec; the inpu; source (Cable or
antenna) tbr the ANT 2 inpttt on d_eTV, if apphcabIe. If
3"otthave not connected anything to ANT 2, skip this s_ep.
6. To save your new settings: Highlight SAVE and press
ENTER.
To revert to your original settings: Nighligh_ CANCEL
and press ENTER bef_re sa_ing.
40
H94(E)040-z (6a-Setup)
Copyright @)2004 TOSHIBA CORPORATION. All rights reserved.
÷
40 _ 8/3/04, 5:22 PM [
To Next Page
Loading...
