Toshiba B-EV4 Series - Page 35

3. REPLACING THE IMPORTANT PARTS EO18-33025
(Revision Date: Mar. 27, 2009)
3.5 Replacing the Print Head Ass’y
3-13
3. Remove the two pins which secure the print head ass’y.
4. Remove the connector from the print head ass’y.
5. Remove the print head ass’y.
NOTE: Do not bend or damage the spring plates when removing and reassembling the
print head ass’y.
Pin
Print Head Ass’y
Pin
Connecto
r
Print Head Ass’y
Print Head Ass’y
Spring Plate