Toshiba B-EV4 Series - Replacing the Feed Gap Sensor (Upper)

3. REPLACING THE IMPORTANT PARTS EO18-33025
(Revision Date: Mar. 27, 2009)
3.13 Replacing the Feed Gap Sensor (Upper)
3-26
3.13 Replacing the Feed Gap Sensor (Upper)
1. Refer to section 3.1 to remove the top cover.
2. Refer to section 3.2 to remove the lower cover.
3. Remove the sensor connector from the main PC board.
4. Use the Phillips screwdriver to remove the screw from the sensor plate.
5. Remove the sensor plate.
6. Remove the feed gap sensor (upper).
Sensor Plate
Feed Gap Sensor (Upper)
T
-1.5x4 Screw
Sensor Connecto
r
(JP34)
Main PC Board