Toshiba B-EV4 Series - Basic Specifications

1. OUTLINE EO18-33025
1.3 Basic Specifications
1-5
1.3 Basic Specifications
Model B-EV4D B-EV4T
Construction Double walled casing & Clam shell design
Maintenance No tool required to repair thermal head and platen
General
Characteristics
Paper holder No roll spindle & No paper holder spring
Print method
Direct thermal printing Direct thermal/thermal transfer
printing
GS model: 203 dpi (8 dots/mm)
Resolution
TS model 300 dpi (12 dots/mm)
GS model: 203 dpi Max. 4.25” (108 mm)
Print width
TS model: 300 dpi Max. 4.17”(106mm)
Print length
GS model: 203 dpi, Max. 39” (999 mm)
TS model: 300 dpi, Max. 39” (999 mm)
GS model: 203 dpi, 2, 3, 4, 5”/sec, 2, 3 ips for peel-off
Print Speed
TS model: 300 dpi, 2, 3, 4”/sec, 2 ips for peel-off
RAM 8 MB SDRAM
Flash ROM 4 MB
User area 832 KB
Optional memory SD Card
Media sensors Feed gap sensor
Black mark sensor
Cover open (Reflective)
Ribbon end (Reflective encoder sensor)
I/F (User installable) RS-232C (Max. 115.2Kbps)
Centronics (SPP)
USB 2.0 (Support Full Speed)
LAN 10/100Base
Barcode Linear
(Same as B-SA4
series)
UPC-A, UPC-E, EAN8/13,
UPC-A add on 2&5,
EAN-8/13 add on 2&5,
Code39, Code93,
Code128, EAN128,
NW7, MSI,
Industrial 2 of 5,
ITF, Postnet,
RM4SCC, KIX-code,
Plessey, RSS14
Printer Language TPCL (Refer to External Equipment I/F manual)
Printer
characteristics
2D Barcode
(Same as B-SV4
series)
Data Matrix, PDF417
Maxicode, QR code
Micro PDF417