EasyManua.ls Logo

Toshiba B-EV4 Series - Parameter Clear

Toshiba B-EV4 Series
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. SYSTEM MODE EO18-33025
(Revision Date: Mar. 27, 2009)
6.2 ABORT OF LABEL FORMAT AUTO CALL
6-2
6.2 ABORT OF LABEL FORMAT AUTO CALL
When the STATUS lamp blinks in orange during the system mode, releasing the [FEED] button aborts a
label format auto call.
6.3 PARAMETER CLEAR
When the STATUS lamp lights in orange during the system mode, releasing the [FEED] button performs
a Parameter Clear.
Parameter Initial Setting
TONE ADJUST +00
FEED ADJUST +0.0mm
CUT POSITION ADJUST +0.0mm
BACKFEED ADJUST +0.0mm
Character Code PC-850
Zero Font 0 (without slash)
Baud Rate 9600 bps
Data Length 8 bits
Stop Bit 1 bit
Parity None
Flow Control Code XON/XOFF + READY / BUSY (DTR) method
Control Code Auto
[FEED] Key Function FEED
Euro Font Code B0H
X axis Fine Adjustment 0mm
Sensor Selection Feed Gap Sensor
Print Speed 203dpi model: 5inch/sec.
300dpi model: 3inch/sec.
IP Address 192.168.010.020
Subnet Mask 255.255.255.000
Gateway 000.000.000.000
DHCP Disable
DHCP Client ID FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Socket COMM. Enabled
Socket COMM. Port 08000

Other manuals for Toshiba B-EV4 Series

Related product manuals