Toshiba B-EV4 Series - Replacing the Stepping Motor

3. REPLACING THE IMPORTANT PARTS EO18-33025
(Revision Date: Mar. 27, 2009)
3.6 Replacing the Stepping Motor
3-15
3.6 Replacing the Stepping Motor
1. Refer to section 3.2 to remove the lower cover.
2. Disconnect the stepping motor connector from the main board.
3. Use the Phillips screwdriver to remove the 2 screws.
4. Remove the stepping motor. The plastic parts for mounting the stepping motor and
thermistor appear.
SM-3x10 Screw
Stepping Moto
r
Stepping Motor
Connector (JP14)
Thermistor
203 DPI model
motor mounting
location
300 DPI model
motor mounting
location