Toshiba B-EX4 - Page 32

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.3 PEEL-OFF MODULE (B-EX904-H-QM-R)
4-17
2. Disconnect the Rewinder Harness from CN1 on the Rewinder PC Board.
3. Disconnect the PSU Harness from the MAIN PC board and remove the screw to detach the PSU.
Rewinder Harness
CN1
Rewinder PC Board
Screw
PSU Harness
PSU
Main PC Board