Toshiba BMS-CT1280E - Page 28

Touch Screen Controller Owner's Manual
28
-EN
● NOTE
3
Wind direction Tap to switch to the following.
● NOTE
Depending on the connected model, items that cannot be set are not displayed.
4
Fan Speed Tap to switch to the following.
● NOTE
• For models with limited fan speed setting range, this is changed to the values that can be set
for each model.
• Fan speeds that cannot be set are not displayed.
5
Set temp. Tap to change the set temperature.
● NOTE
• When set to a temperature outside the setting
range limit of each operation mode, the
temperature is changed to the upper or lower
limit of the setting range.
• If there are Dual Set Point compatible models
in the group, two tabs will be displayed. When
you tap
[3-(6)], one set temperature is
displayed, and when you tap
[3-(7)], two set
temperatures are displayed. Tap to
change the set temperature.
No. Name Functions
3
-(6)
3
-(6)
3
-(7)
3
-(7)
• For models that do not have the function set, the setting change is ignored.
• For the setting of [Lock] [Unlock] of [
3-(8)], see "Local Remote Controller Lock" (P.37).
• For the settings of [
3-(9)], see "Set Operation Details" (P.39).
4 Confirm that the changed item is checked, and tap [4-(1)]
4
-(1)
4
-(1)