Toshiba BMS-CT1280E - Set Demand Control Schedule of Outdoor Unit (Power Peak Cut Schedule); Add;Change Power Peak Cut Schedule

Touch Screen Controller Owner's Manual
54
-EN
The demand function of the outdoor unit can be managed with the schedule to 90 to 0% according to the peak time zone.
Setting example:
● NOTE
• Cannot be set when the Outdoor Demand Schedule is disabled. Please enable the Outdoor Demand Schedule. (P.57)
• Demand levels that can be set are "Release", "90%", "80%", "70%", "60%" and "0%".
• Up to 10 schedules can be created.
Add/change Power peak cut schedule
Set demand control schedule of outdoor unit (Power peak cut schedule)
When "80%" at midnight on Monday,
"90%" at midnight on Saturday,
and "Release" at midnight on Sunday is set:
1 Tap [1-(2)] with [1-(1)] (P.53)
2 Tap to register new
To change, tap of the schedule you want to change
● NOTE
When the demand function is functioning at the current time, appears.
3 Tap [3-(1)] and set the check box of the outdoor unit for
setting the Power peak cut schedule to
● NOTE
The schedule number ( ) will be displayed on outdoor units that have
already been scheduled. Cannot be selected.
4 Tap the day of the week tab to start the schedule, then tap
To change an already registered schedule, tap on the
corresponding schedule
90
%
80
%
80
%
Monday
0:00
Start
Tuesday
0:00
Wednesday
0:00
Thursday
0:00
Friday
0:00
Saturday
0:00
Start
Sunday
0:00
Start
Monday
0:00
Start
Release
1
-(2)
1
-(2)
1
-(1)
1
-(1)
3
-(1)
3
-(1)