Toshiba BMS-CT1280E - Set Alarm Email Destination (Alarm Email Address)

Touch Screen Controller Owner's Manual
63-
EN
You can set the email address to send email to when an alarm occurs.
● NOTE
Up to five email addresses can be set.
4 Tap [OK].
● NOTE
To test-send to the registered email address, tap [Test transmission], which displays after you tap [OK].
6 Tap [6-(1)]
The Unit restarts.
Set alarm email destination (Alarm email address)
1 Tap [1-(2)] with [1-(1)] (P.57)
2 Tap the address field to register
3 Enter the email address on the keyboard, then tap [3-(1)]
● NOTE
• Tap [Shift] to toggle between upper case letters and lower case letters, and
numbers and symbols.
• Tap [Enter] to enter the next field.
• Tap [BS] to delete one character.
6
-(1)
6
-(1)
1
-(1)
1
-(1)
1
-(2)
1
-(2)
3
-(1)
3
-(1)