Touch Screen Controller Owner's Manual
5-
EN
1 Quick Start Guide
Basic Usage
To start/stop the air conditioner(s)
"Start/Stop Operation" (P.24)
To change the set temperature
"Change the Air Conditioning
Settings (ON/OFF/Mode/Wind
direction/Fan Speed/Set temp.)"
(P.27)
To change the Mode (Cool/Heat/Auto/Dry/Fan)
"Change the Air Conditioning
Settings (ON/OFF/Mode/Wind
direction/Fan Speed/Set temp.)"
(P.27)
To check whether you have forgotten to
turn off the air conditioner(s)
Batch ON/OFF screen
"Monitor the Overall Air
Conditioning System" (P.36)
To check for current alarms Alarm history screen
"Monitor the Overall Air
Conditioning System" (P.36)
Advanced Usage Please use the following functions as necessary.
To set start/stop timer
"Set the Operation Schedule" (P.32)
To configure and confirm the energy
saving settings
Return Back
"Confirm the setting contents of Return
Back (Return Back)" (P.43)
Eco Temperature Shift
"Change to energy saving temperature
(Eco Temperature Shift)" (P.44)
Change Temperature Range
"Set the temperature change range
(Set temp. range limit)" (P.44)
Save Mode
"Control air conditioner power (Energy
saving ratio [%])" (P.43)
Schedule settings
"Set the Operation Schedule" (P.32)
Power peak cut schedule
"Set demand control schedule of
outdoor unit (Power peak cut
schedule)" (P.54)
To operate the Total Heat Exchange Unit
"Turn ON/OFF the ventilation function
(Ventilation → ON/OFF)" (P.41)
To cancel the FILTER Sign after filter cleaning
"Erase FILTER Sign (Filter sign reset)"
(P.42)
To connect with a PC that has the PC
software Data Analyzer installed and
display the usage of energy
Connect with the PC that has the PC
software Data Analyzer installed and
display the energy usage
"Settings when Using the PC Software
Data Analyzer" (P.23)
IP Address Setting
"Set the IP address of the Touch
Screen Controller (IP Address)" (P.62)
Output to USB memory
"Output data to a USB memory stick
(Output to USB memory)" (P.57)
To connect with a PC that has Report
Creation Software installed and
display the power usage report
Connect with a PC that has Report
Creation Software installed and
display the power usage report
"Electric Power Allocation System that
can be Used with this Unit" (P.67)
Automatic Meter-Reading
"Set the summation date of the power
allocation data (Automatic Meter-
Reading)" (P.68)
Manual Meter-Reading
"Sum data for power allocation as
necessary (Manual Meter-Reading)"
(P.69)
IP Address Setting
"Set the IP address of the Touch
Screen Controller (IP Address)" (P.62)
To output the daily and monthly report files, the alarm files, and the setup files
by USB
"Output data to a USB memory stick
(Output to USB memory)" (P.57)
To Next Page
Loading...
