Toshiba BMS-CT1280E - Change to Energy Saving Temperature (Eco Temperature Shift); Set the Temperature Change Range (Set Temp. Range Limit)

Touch Screen Controller Owner's Manual
44
-EN
Change to energy saving temperature (Eco Temperature Shift)
An energy saving function that changes (shifts) the set temperature according to the current operation mode as follows.
● NOTE
• Displayed in the case of a compatible air conditioner.
• When the Mode is set to [Heat], [Cool], or [Dry], the settings screen is displayed.
Set the temperature change range (Set temp. range limit)
You can set the set temperature range for each operation mode.
● NOTE
• Displayed in the case of an air conditioner. It is not displayed in the case of ON/OFF unit.
• If the current set temperature of the air conditioner is outside of the set temperature range after the change, it will be
changed to the temperature within the range after the change.
1 Tap the upper/lower limit temperature you want to
change
● NOTE
• Displayed in the case of a compatible air conditioner.
• Some operation modes are not displayed depending on the model.
2 Tap the number, enter the temperature, and tap [2-(1)]
Operation Mode Set Temperature Shift Width
Cool/Dry Current set temperature +2°C shift
Heat Current set temperature -2°C shift
Auto/Fan Remain at current set temperature
2
-(1)
2
-(1)