Toshiba BMS-CT1280E - [Functions] Menu Settings; How to Display the [Functions] Menu; Release Demand Control of Outdoor Unit (Release Power Peak Cut)

Touch Screen Controller Owner's Manual
53-
EN
On the [Functions] menu, demand control of outdoor units and summation of data for power allocation can be performed.
[Functions] Menu Settings
How to display the [Functions] menu
1 Tap
[1-(1)] appears.
2 Tap [2-(1)]
[3-(1)] appears.
3 Tap the item you want to set with [3-(1)]
The settings screen of the selected item appears on the right.
For details on the setting contents of each item, refer to the
following.
• Release power peak cut (P.53)
• Power peak cut schedule (P.54)
• Operation mode restriction (P.56)
• Automatic Meter-Reading (P.68)
• Manual Meter-Reading (P.69)
• System reboot (P.56)
• Scheduler Operation (P.57)
• Output to USB memory (P.57)
Release demand control of outdoor unit (Release power peak cut)
1 Tap [1-(2)] with [1-(1)] (P.53)
2 Tap [2-(1)]
Outdoor demand set for all outdoor units is released.
● NOTE
• Outdoor demand can be set by the "Power peak cut schedule". (P.54)
Outdoor demand may function with digital input set locally. In this case it
can also be released.
• When you release the Power peak cut, the setting value of [Power peak
cut] on the option screen changes to the release state. (P.43)
2
-(1)
2
-(1)
1
-(1)
1
-(1)
3
-(1)
3
-(1)
2
-(1)
2
-(1)
1
-(2)
1
-(2)
1
-(1)
1
-(1)