Toshiba BMS-CT1280E - Page 47

Touch Screen Controller Owner's Manual
47-
EN
Return Back settings [Return Back]
An energy saving function whereby if you temporarily change the set temperature to
one which increases the load, you can automatically return to the energy saving set
temperature after a certain time has elapsed. For example, if you set COOL to 28°C/
30 minutes, then if the set temperature is set to below 28°C, the Unit will return to
28°C 30 minutes after the change.
● NOTE
Displayed in the case of a compatible air conditioner.
Local operation prohibition setting
[Lock setting of remote control]
Tap the check box of the function whose setting you want to change to set it to ,
then select [(1)] or [(2)].
Save operation setting
[Energy saving ratio[%]]
To enable the setting, set the check box of [(3)] to . For details, see "Control air
conditioner power (Energy saving ratio [%])" (P.43)".
Ventilation operation setting
[Ventilation -> ON/OFF]
You can turn ON/OFF the operation of the ventilator connected to the air to air heat
exchanger(s) or air conditioner(s). To enable the setting, set the check box of [(4)] to
and apply the setting.
Vent. Mode [Ventilation -> Mode]
You can set the ventilation mode of the ventilator connected to the air to air heat
exchanger(s) or the air conditioner(s).
To enable the setting, set the check box of [(5)] to and apply the setting. For
details, see "Set Ventilation Mode (Ventilation → Mode)" (P.41).
Setting Items Setting Procedure
(1)(1) (2)(2)
(3)(3)
(4)(4)
(5)
(5)