Toshiba BMS-CT2560U-E - Page 94

Touch Screen Controller Owner's Manual
94
-EN
5 Tap [5-(1)]
6 Set the controls to execute if the thresholds that are set in
step
4 are exceeded
•[6-(1)] Outdoor unit selection: Select a target outdoor unit
•[
6-(2)] Control contents selection: Select the power peak cut
control to execute if the threshold is exceeded
● NOTE
• You can set power peak cut controls with seven stages from 100% (no
restriction) to 0% (operation stop).
• You can set them for each of the outdoor units connected to the Unit.
• Before setting thresholds for outdoor units, initial settings are required. For
details, contact service personnel.
7 Tap [7-(1)] and tap [OK]
● NOTE
Tap [7-(2)] to check the setting contents.
5
-(1)
5
-(1)
6
-(2)
6
-(2)
6
-(1)
6
-(1)
7
-(1)
7
-(1)
7
-(2)
7
-(2)