Toshiba e-studio 250 - Page 180

e-STUDIO160/200/250 DRUM-RELATED SECTION 11 - 8 December 2002 © TOSHIBA TEC
5. Release 9 hooks and detach the separation
charger guide.
Fig. 11-6-4
6. Detach 2 dampers.
Fig. 11-6-5
7. Release the spring and detach the separation
and transfer charger wires.
Note: Be careful handling the wires.
11-6-4
11-6-5
11-6-6
Charger unit
Transfer
charger wire
Wire
Spring
Spring
Separation
charger wire
Damper
Damper
Damper
Guide roller
Separation charger guide
Charger unit
Hook
Hook
Hook
Fig. 11-6-6