December 2002 TOSHIBA TEC 2 - 15 e-STUDIO160/200/250 OUTLINE OF THE MACHINE
(3) Switches
Remarks
(B-2)
(B-2)
(B-3)
(D-2)
(D-2)
(D-2)
Function
Detects the presence of a toner cartridge.
Detects the open/close state of the front
cover.
Detects the open/close state of the copier
cassette.
Power ON/OFF switch
Detects the open/close state of the side cover
when removing a jam at the transfer section,
etc. and cuts off the +24V power supply.
Detects the open/close state of the front cover
when changing the toner cartridge, etc. and
cuts off the +24V power supply.
Symbol
SW1
SW2
SW3
SW4
SW5
SW6
Name
TC-SW
Toner cartridge switch
FRCOV-SW
Front cover switch
CST-SW
Paper cassette switch
MAIN-SW
Main switch
SIIL-SW
Interlock switch
(Side cover)
FRIL-SW
Interlock switch
(Front cover)
(4) Motors
Remarks
(C-1)
(C-1)
(C-1)
(C-1)
(C-1)
(C-1)
(C-1)
Function
Performs scanning for the optical system.
Allows ozone to escape from the inside of
the copier.
Cools the inside of the copier.
Sucks the developed paper from the drum.
Main drive motor to drive the entire system.
Drives the auger in the toner cartridge and
supplies toner to the process unit.
Lifts up the tray of the copier cassette.
Symbol
M1
M2
M3
M4
M5
M6
M7
Name
SCN-MOT
Scanner motor
PU-FAN
Process unit FAN motor
POW-FAN
Power supply unit FAN
motor
VCM-FAN
Vacuum FAN motor
MD-MOT
Main motor
TS-MOT
Toner supply motor
T-UP-MOT
Tray-up motor
To Next Page
Loading...
