Toshiba E-studio 281c

Other manuals for Toshiba E-studio 281c

Operator's Manual370 pages

Printing Guide372 pages

User Functions Guide234 pages

Scanning Guide106 pages

Specifications8 pages

Questions and Answers

E
Erica FigueroaSep 3, 2025
Why can't I view job in TopAccessDocMon Print Queue of Toshiba All in One Printer?
- J
  John LopezSep 3, 2025
  If you are unable to view a print job in the TopAccessDocMon print queue for your Toshiba All in One Printer, check the device location to ensure jobs should be listed there. There are several reasons why you may not see the job in the print queue: the wrong device may be selected, the job may be queued on the Windows operating system print spooler, the job may be held in the Novell print queue, or a copier error may be preventing printing.
B
bradfordmatthewSep 2, 2025
How to fix 'This Port is Currently in Use' error on Toshiba All in One Printer?
- K
  Kevin DavisSep 2, 2025
  If your Toshiba All in One Printer displays the message 'This Port is Currently in Use', it means that the driver was either open, printing a job, or is in use by another printer or application. To resolve this, ensure that all print jobs have completed before deleting a port. If problems persist, exit all applications and try again. Also, check each driver to see if another driver is using the same port. If so, first change the driver’s port setting and then delete the port.
D
Darrell AyalaSep 1, 2025
What to do if Toshiba All in One Printer shows 'Retrieval of Printer Configuration Failed'?
- K
  karen72Sep 1, 2025
  If your Toshiba All in One Printer displays the message “Retrieval of printer configuration failed” when you try to access the printer properties, first verify that the system is running. If it is not, turn it on. If it is running, connect to the printer via TopAccess. If you still cannot connect, reboot the printer. If that still fails, check the printer driver port assignment to ensure it is correct.
W
Wesley KeithAug 31, 2025
Why Toshiba E-studio 281c equipment does not start?
- A
  Ann WardAug 31, 2025
  If your Toshiba All in One Printer does not start, ensure the power cord is fully inserted until it stops. Also, verify that the cover is properly closed.
K
Karen MeadowsAug 31, 2025
How to fix copy images that are partially missing from my Toshiba All in One Printer?
- M
  mpenningtonAug 31, 2025
  To correct partially missing copy images from your Toshiba All in One Printer, select copy paper that matches the original size, or adjust the reproduction ratio to fit the paper size. You might also need to adjust the image shift value.
D
Donna HopkinsAug 30, 2025
What to do if my Toshiba All in One Printer images are blurred?
- A
  Alfred AustinAug 30, 2025
  If the images from your Toshiba All in One Printer are blurred, place the original on the glass and firmly close the Reversing Automatic Document Feeder (if available). You may also need to replace the paper with new paper.
Z
zsilvaAug 29, 2025
What to do if my Toshiba All in One Printer display does not change when pressing buttons?
- C
  Christina MartinAug 29, 2025
  If the display of your Toshiba All in One Printer does not respond when you press buttons or icons, try the following: Press the [ENERGY SAVER] or [START] button on the control panel to exit the energy saving mode. You can also press the [START] button to power the device ON. Ensure you are entering the correct department code and user information. Finally, wait for the equipment to become ready.
G
gwalterAug 28, 2025
Why does paper jamming occur frequently in my Toshiba E-studio 281c All in One Printer?
- S
  Shawna MillsAug 28, 2025
  Frequent paper jams in your Toshiba All in One Printer can occur for several reasons. The message “Check paper size setting on control panel for drawer N (Bypass)” may appear, indicating that you should match the paper size in the drawer or bypass tray to the equipment's registered size. Another cause is exceeding the paper limit inside the side guide; remove some sheets to stay below the indicated line. Also, ensure an appropriate space between the side guide and the paper, placing the paper straight along the side guide. If the jammed paper is hard to find, follow the touch panel guidance.
G
georgegonzalezAug 27, 2025
Why should I not use alcohol to clean my Toshiba E-studio 281c?
- K
  kevin66Aug 27, 2025
  When cleaning your Toshiba All in One Printer, avoid using solvents like alcohol, thinner, or benzine. These substances can warp or discolor the surface of the equipment.
L
Lori JordanAug 26, 2025
What to do if I cannot remember document password on Toshiba All in One Printer?
- B
  brendan35Aug 26, 2025
  If you cannot remember the password for a Private Print job on your Toshiba All in One Printer, you must delete the job from the Touch Panel Display or through TopAccessDocMon and resubmit the Private Print job using a new password, as there is no way to recover the original password.

Toshiba E-studio 281c Specifications

General

Brand	Toshiba
Model	E-studio 281c
Category	All in One Printer
Language	English

Summary

General Precautions

When installing or moving

Safety instructions and warnings for installation and moving procedures.

Caution

When using the Multifunctional Digital Color Systems

Precautions related to operation, handling liquids, and potential hazards during use.

When handling supplies

During maintenance or inspection

Important warnings and precautions for maintenance and inspection procedures.

1. BEFORE USING EQUIPMENT

1. Description of Each Component

Detailed overview of the machine's main parts and their functions.

2. Turning Power On; Shutdown

Procedures for turning the equipment on, off, and managing power settings.

3. Energy Saving Mode

4. Setting Copy Paper

Instructions for loading and setting various types and sizes of paper.

2. HOW TO MAKE COPIES

1. Setting Originals

Information on acceptable original types and how to place them for copying.

2. Making Copies

Step-by-step guide on how to perform copying operations.

3. Bypass Copying

Instructions for copying using the bypass tray for special paper types or sizes.

4. Proof Copy

3. SETTING OF BASIC COPY MODES

1. Paper Selection

How to select the appropriate paper for copying, including automatic and manual methods.

2. Switching Color Mode

Instructions on how to select between Full Color, Black, and Auto Color modes.

3. Enlargement and Reduction Copying

Guide on how to enlarge or reduce copy sizes, including automatic magnification.

4. Selecting Finishing Modes

Options for post-copy processing like sorting, stapling, and hole punching.

5. Duplex Copying

Instructions for making 2-sided copies from 1-sided or 2-sided originals.

6. Original Mode

7. Copy Density Adjustment

4. IMAGE ADJUSTMENT

1. Color Balance (YMCK Adjustment)

2. RGB Adjustment

5. USING THE EDITING FUNCTIONS

1. IMAGE SHIFT

4. DUAL PAGE

5. 2 IN1; 4 IN1

6. MAGAZINE SORT

7. EDITING

8. XY ZOOM

13. JOB BUILD

6. e-FILING

1. e-Filing

Feature to store, print, and manage documents using the equipment's hard disk.

2. Creating User Boxes

3. Changing Data of User Boxes

4. Deleting User Boxes

5. Storing Documents in e-Filing

Steps to save scanned original data to e-Filing, including copy mode settings.

6. Printing Stored Documents

How to print stored documents, including options for partial printing and setting changes.

7. Deleting Folders or Documents

7. TEMPLATE

1. Template

2. Registering User Groups and Templates

3. Changing Data of User Groups and Templates

4. Recalling Templates

5. Deleting User Groups or Templates

8. JOB STATUS

1. Job Status

2. Confirming Print Job Status

How to check the status of print jobs, including options to delete, pause, or move.

3. Confirming Scan Job Status

4. Log List

6. Error Code

Lists error codes and their corresponding problems and recommended actions.

9. BLINKING GRAPHIC SYMBOLS

3. Replace Toner Cartridge Symbol

Alerts the user when toner cartridges are low or empty, guiding replacement.

4. Replace Toner Bag Symbol

5. Jam Symbols

Visual indicators for paper misfeeds in different parts of the equipment.

6. Call Service Symbol

Indicates the need for service assistance due to an error or malfunction.

10. WHEN THIS MESSAGE APPEARS

1. “Check staple cartridge”

Message indicating low or empty staples in the finisher's stapler.

2. “Check staple cartridge in the Saddle Stitch Unit”

Alert for low or empty staples specifically in the Saddle Stitch Unit stapler.

3. “Examine stapler”

Message indicating jammed staples in the finisher, requiring inspection.

4. “READY (CHECK STAPLER)”

5. “Examine stapler in the Saddle Stitch Unit”

Message indicating jammed staples in the Saddle Stitch Unit, requiring inspection.

6. “READY (CHECK SADDLE STITCH STAPLER)”

7. “READY (HOLE PUNCH DUST BIN IS FULL)”

10. “Check paper size setting on control panel for drawer N”

11. MAINTENANCE

1. Daily Inspection

2. Simple Troubleshooting

Basic troubleshooting steps for common issues like equipment not starting or paper jams.

12. SPECIFICATIONS & OPTIONS

1. e-STUDIO281 c;351 c;451 c Specifications

2. Specifications of Options

Related product manuals

Toshiba E-STUDIO 282

204 pages

Toshiba e-studio 2802a

2 pages

Toshiba e-STUDIO 2820c

78 pages

Toshiba e-STUDIO 2830c