March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 21
2
3A80 Partial mail was received during
the partial mail setting is disabled.
Partial mail reception setting OFF Ch.5.1.14 [ 6 ]
3A81 Partial mail was received during
the partial mail setting is disabled.
This mail has been transferred to
the administrator.
Ch.5.1.14 [ 6 ]
3A82 Partial mail was received during
the partial mail setting is disabled.
This mail could not be transferred
to the administrator.
Ch.5.1.14 [ 6 ]
3B10 Format Error has been detected
in the received mail.
E-mail format error Ch.5.1.14 [ 6 ]
3B11 Format Error has been detected
in the received mail. This mail
has been transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3B12 Format Error has been detected
in the received mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3B20 Content-Type Error has been
detected in the received mail.
Content-Type error Ch.5.1.14 [ 6 ]
3B21 Content-Type Error has been
detected in the received mail.
This mail has been transferred to
the administrator.
Ch.5.1.14 [ 6 ]
3B22 Content-Type Error has been
detected in the received mail.
This mail could not be transferred
to the administrator.
Ch.5.1.14 [ 6 ]
3B30 Charset Error has been detected
in the received mail.
Charset error Ch.5.1.14 [ 6 ]
3B31 Charset Error has been detected
in the received mail. This mail
has been transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3B32 Charset Error has been detected
in the received mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3B40 Decode Error has been detected
in the received mail.
E-mail decode error Ch.5.1.14 [ 6 ]
3B41 Decode Error has been detected
in the received mail. This mail
has been transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3B42 Decode Error has been detected
in the received mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
To Next Page
Loading...
