16 Default Settings
0.Default Settings
A default refers to a setting selected automatically when you turn on the equipment, when the equipment wakes up
from Sleep Mode, or when the [FUNCTION CLEAR] button is pressed on the control panel. To scan your document, the
default settings can be used as they are whereas pressing [Scan Setting] during the scan operation allows you to
select the preferred settings for each scan job.
P.38 “Changing Scan Settings”
The available settings in the scan mode and their factory defaults are listed in the table below.
To display a list of the selected options for scan settings, press [Settings].
P.14 “Viewing the Scan Menu on the Touch Panel”
The default settings can be changed on the screen which is opened by pressing [User Functions -user-] on the home
screen. For details, refer to the MFP Management Guide.
Settings Factory Defaults
Color Mode Black
Resolution 200dpi
Original Mode Text
Rotation 0 (degrees)
Single/2-Side Scan Single
Original Size Auto
Compress Mid
Omit Blank Page Off
Outside Erase Off
Range Adjustment ±0
Exposure Auto
Contrast ±0
Background Adjustment ±0
Sharpness ±0
Saturation ±0
RGB Adjustment
Red (R) ±0
Green (G) ±0
Blue (B) ±0
ADF Scan Noise Reduction None
OCR Setting - Language 1st English
2nd None
OCR Setting - Auto Rotation On
To Next Page
Loading...
Need help?
General
