3.USEFUL FUNCTIONS
Changing Scan Settings 41
USEFUL FUNCTIONS
Scanning 2-Sided originals
With the Single/2-Sided Scan setting, you can choose whether to scan your originals on both sides. Press [Scan
Setting] > [Single/2-Sided Scan] and then select a surface pattern if necessary.
[Single
]— Select this option to scan only the front of the originals.
[Book]— Select this option to scan both sides of the originals in the same direction.
[Tablet] — Select this option to scan the front in one direction and the back rotated by 180 degrees.
Specifying the original size
Press [Scan Setting] > [Original Size] and then select an original size.
[Auto
] — Select this option to have the equipment automatically detect the size of your originals.
[Mixed Original Sizes] — Select this option when placing originals of different sizes in the ADF.
To Next Page
Loading...
Need help?
General
