Inserting the Batteries into the Remote Control
Lift open the battery compartment cover (as shown).1.
Install 2 “AAA/R03” batteries (included); the correct polarity is shown inside the battery 2.
compartment.
Always check the positive/negative symbols on the batteries to ensure
they are inserted correctly.
Replace the battery compartment cover and push down until it clicks shut.3.
Note:
Always dispose of old batteries safely. Check with your local council for how you should get rid of batteries. •
Never put batteries on a fire or in the bin with normal household waste.
A label with support information is located on the back of the remote control. •
To Next Page
Loading...
Need help?
General
Weight and Dimensions
