58 HX7+ ASD Installation and Operation Manual
Scrolling Monitor
All items of the Monitor Screen may be selected and displayed at the Frequency Command screen while
running. The items are selected at Program Monitor Setup Scrolling Monitor. Place a check in the
adjacent box of the monitored item of interest to display the item.
The display area at the Frequency Command screen is fixed and allows for two monitored items. If more
than two items are selected for display, the items are scrolled at the one- to sixty-second rate set by the
Seconds Between Switch user setting of the Scrolling Monitor screen.
If no items are selected, No Items is displayed at the Frequency Command screen.
The selected items, along with their real-time values, are displayed (and/or scrolled) on the Frequency
Command screen while running.
To Next Page
Loading...
