Toshiba IK-TU51CU - 6 Operation.; Automatic Black Balance

6. OPERATION
(D Referring to the item “ 5. CONNECTION”, connect each equipment correctly.
(D Turn on the connected equipment and the camera.
® When using the camera for the first time and when replacing the camera cable and the camera head, be
sure to operate the ABB adjustment in advance, referring to the item “6.1 Automatic Black Balance”.
® Facing the lens to the object, operate the lens iris adjustment, focus adjustment, etc.
(D Referring to the item “6.2 White Balance”, operate the adjustment.
(D Referring to the items “6.3 Scene File, 6.4 Gain, 7. MODE SETTING BY ON SCREEN DISPLAY”, select
the necessary items.
6. 1 Automatic Black Balance
Black balance adjustment is necessary to get the correct black picture level.
■ Close the lens iris.
If the color bar pattern is displayed on the screen or if the index menu/menu is displayed, press the
[DISP] button to disable the color bar pattern or the character display. If the camera is in Freeze Mode,
perform the cancellation procedure (refer to the item “6.6 Freeze Operation”) to return the camera to Live
Image Mode.
• Hold the [DATA DOWN] button for approx. 1 second.
• When the black balance adjustment operation starts, the character ABB blinks on the screen.
• When the black balance adjustment operation finishes, the character ABB ends blinking and the result
appears for approx. 1 second.
Display
Meaninq
ABB OK
Automatic black balance adjustment finished correctlv.
ABB NG
CLOSE LENS
Automatic black balance adjustment cannot be performed because the lens iris
is open. Close the lens iris.
ABB NG
Automatic black balance adjustment cannot be performed.
Operate the automatic black balance aaain.
12