Toshiba IK-TU51CU - (1.1) Changing each Setting in AUTO Mode

(1.1) Changing each setting in AUTO mode
• Shutter mode AUTO, MANUAL, SS, EXT TRIG
Video level adjustment -100 to 100
Peak and average ratio adjustment 00 : 10 to 10 : 00
Automatic shutter response speed adjustment 1 to 10
Automatic shutter area selection
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E, USER
Automatic shutter area display selection
FLD/FRM SW FLD, FRM
Freeze operation selection FRONT, TRIG JR-, TRIG
< MODE = AUTO>
(a) Changing the video level in the automatic shutter mode
® Set the ” to LEVEL by pushing [MENU UP], [MENU DOWN] buttons.
® Set the video level by pushing [DATA UP], [DATA DOWN] buttons.
-*• The value increases by pushing [DATA UP]
-100 - ► 0 <- - ► 100
«- The value decreases by pushing [DATA DOWN]
(b) Changing the automatic shutter detection (ratio between peak and average value)
® Set the ■ to PEAK/AVE by pushing [MENU UP], [MENU DOWN] buttons.
@ Set the ratio between peak and average value by pushing [DATA UP], [DATA DOWN] buttons.
(Peak: Average) -* The peak value increases by pushing [DATA UP]
00:10 < - ► 05:05 < - ► 10:00
*- The peak value decreases by pushing [DATA DOWN]
(c) Changing the automatic shutter response speed
® Set the ’ to SPEED by pushing [MENU UP], [MENU DOWN] buttons.
® Set the response speed by pushing [DATA UP], [DATA DOWN] buttons.
—" The response speed becomes faster by pushing [DATA UP]
1*- ► 5 < - ► 10
«- The response speed becomes slower by pushing [DATA DOWN]
20