Toshiba IK-TU51CU - (1.4.2) Changing each Setting in 1 PULSE SR Mode

(1. 4. 2) Changing each setting in 1 PULSE SR mode
Shutter mode AUTO, MANUAL, SS, EXT TRIO
EXT TRIG mode
1 PULSE SNR, 1 PULSE SR, 2PULSE, RS232C
Input trigger pulse setting at 1 PULSE SNR and 1 PULSE SR
■ ft- ••• The rising edge
V ••• The falling edge
Exposure time setting at 1 PULSE SNR and 1 PULSE SR
0.06ms ◄ - ► 0.4ms ◄ - ► I m s^- ► 1 6 ms
0.02ms step 0.1 ms step 1 ms step
< MODE = EXT TRIG EXT TRIG = 1 PULSE SR>
(a) Changing inputting trigger pulse setting
® Set the ” to TRIG PULSE by pushing [MENU UP], [MENU DOWN] buttons.
® Select either^ or by pushing [DATA UP], [DATA DOWN] buttons.
* This setting is only valid in the 1 PULSE mode (1 PULSE SNR and 1 PULSE SR). To make the trigger
pulse setting when using the 2PULSE mode, first set the EXT TRIG mode to 2PULSE, then make the
settings with the TRIG PULSE items.
(b) Changing 1 PULSE exposure time setting
(D Set the " to EXPOSURE by pushing [MENU UP], [MENU DOWN] buttons.
® Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP] - ►
0.06ms < ■ - ► 0.4ms < - ► 1ms < - ► 16ms
(0.02ms step) (0.1 ms step) (1 ms step)
«-[DATA DOWN]
25