Toshiba IK-TU51CU - (1.2) Changing each Setting in MANUAL Mode.22

(1. 2) Changing each setting in MANU mode
Sutter mode AUTO, MANUAL, SS, EXT TRIG
Sutter speed setting
OFF, 1/100s, 1/250S, 1/500S, 1/1000s, 1/2000s,
1/4000s, 1/10000s
FLD/FRM SW FLD, FRM
Freeze operation selection FRONT, TRIG^l- , TRIG
< MODE = MANUAL>
(a) Changing the shutter speed
® Set the ” to MANU by pushing [MENU UP], [MENU DOWN] buttons.
® Set the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP] - ►
OFF J1/100si 1/250si 1/500si 1/IOOOsJ 1/2000&t 1/4000s£ l/IOOOOs
◄ - [DATA DOWN]
(b) Changing the CCD storage mode
® Set the to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing the freeze operation setting
® Set the ” to FREEZE INPUT by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the freeze operation by pushing [DATA UP], [DATA DOWN] buttons.
When set to FRONT : The Freeze Operation is performed by using the FREEZE button on the front
panel.
When set to TRIG jfL :The Freeze Operation is performed at the rising edge of the rear TRIG input.
When set to TRIG V : The Freeze Operation is performed at the falling edge of the rear TRIG input.
22