Toshiba IK-TU51CU - (1.4.4) Changing each Setting in RS232 C Mode.27; GAIN (Video Gain).27

(1. 4. 4) Changing each setting in RS232C mode
• Sutter mode AUTO, MANUAL, SS, EXT TRIG
• EXT TRIG mode
1 PULSE SNR, 1 PULSE SR, 2PULSE, RS232C
• FLD/FRM SW FLD, FRM
< MODE = EXT TRIG EXT TRIG = RS232C>
(b) Changing the CCD storage mode
® Set the to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
12) GAIN (Video gain)
The GAIN has three modes; AUTO, MANUAL, OFF.
Set the to MODE, push the [DATA UP], [DATA DOWN], and select mode among AUTO, MANUAL, OFF.
In the OFF mode, gain is fixed to OdB.
27