Toshiba IK-TU51CU - (1.4) Changing each Setting in EXT TRIG Mode.24; (1.4.1) Changing each Setting in 1 PULSE SNR Mode.24

(1. 4) Changing each setting in EXT TRIG mode
The EXT TRIG has four modes; 1 PULSE SNR, 1 PULSE SR, 2PULSE, RS232C.
First set the to MODE and select EXT TRIG, then set the ” to EXT TRIG and select the desired EXT
TRIG mode.
(1. 4. 1) Changing each setting in 1 PULSE SNR mode
Shutter mode AUTO, MANUAL, SS, EXT TRIG
EXT TRIG mode
1 PULSE SNR, 1 PULSE SR, 2PULSE, RS232C
Input trigger pulse setting at 1 PULSE SNR and 1 PULSE SR
••• The rising edge
"V ••• The falling edge
Exposure time setting at 1 PULSE SNR and 1 PULSE SR
0.06ms * - ► 0.4ms < - ► 1ms < -M6ms
0.02ms step 0.1 ms step 1 ms step
(D Set the to TRIG PULSE by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either jn_ or ilT by pushing [DATA UP], [DATA DOWN] buttons.
* This setting is only valid in the 1 PULSE mode (1 PULSE SNR and 1 PULSE SR). To make the trigger
pulse setting when using the 2PULSE mode, first set the EXT TRIG mode to 2PULSE, then make the
settings with the TRIG PULSE items.
[Move up and down
By pushing
MENU UP,DOWN
[Set by pushing
DATA UP,DOWN
-- 1 SHUTTER
-- <FILE
—MODE
EXT TRIG
EXT TRIG
1PULSE SNR
TRIG PULSE
EXPOSURE
16ms
< MODE = EXT TRIG EXT TRIG = 1 PULSE SNR>
(a) Changing inputting trigger pulse setting
(b) Changing 1 PULSE exposure time setting
® Set theto EXPOSURE by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP] - ►
0.06ms < - ► 0.4ms * - ► 1ms * ► 16ms
(0.02ms step) (0.1ms step) (1ms step)
◄ -[DATA DOWN]
24