Toshiba IK-TU51CU - Page 5

(7) OPTION. 37
(7.1) Chaging OUTPUT1 output. 37
(7.2) Chaging OUTPUT2 output. 37
(7.3) Chaging shading correction mode.37
(7.4) Chaging manual shading correction setting.37
(7.5) Chaging RGB SYNC.37
(7.6) Chaging FREEZE DISP setting. 38
(7.7) Chaging Negative/Positive inversion switch.38
(7.8) Chaging detail signal output.38
(7.9) Chaging RS232C communication baud rate setting.38
(8) Setting USER area.38
(9) Setting to factory setting status.40
7.3 External Sync.40
(1) External sync signal input conditions.40
(2) External sync frequency range.41
(3) Using the unit with external sync signal.41
(3.1) H (horizontal) phase adjustment.41
(3.2) SC (Sub carrier) phase afjustment.41
7.4 Synchro. Scan Operation.42
(1) Setting by 1H. 42
(2) Setting by the frame. 42
7.5 EXT TRIG(External trigger). 43
(1) 1 PULSE SNR (1 PULSE Sync Non Reset). 43
(2) 1 PULSE SR (1 PULSE Sync Reset). 44
(3) 2 PULSE. 45
(4) RS232C. 47
7.6 Freeze Operation by Trigger Input. 48
7.7 Digital output. 49
(1) Sync pulse timing. 49
8. BEFORE MAKING A SERVICE CALL.50
9. SPECIFICATIONS.51
10. EXTERNAL APPEARANCE DIAGRAM.52
5