IPedge UG 01/13 TOSHIBA 129
Status Messages
and DND
Status messages is available under the DND Off option.
Setting a Status Message
1. Click the button to bring up the Set Status Message
window. The following screen displays.
2. Change the selection to Status Msg Only On
3. Use the pull down listing and select a Status Message.
4. When needed enter additional information on the Custom 2nd Line.
5. Click the Save button when done. The status message will appear on the
DSS keys throughout the system.
Turning Off DND or Message Only
1. Click the button to bring up the or Status Message window.
2. Click the Msg Off radio button to remove the Status Message.
To Next Page
Loading...
