IPedge
Feature Operations
IPedge UG 01/13 TOSHIBA 43
• Destination extension or telephone number – Call Forward
destination numbers may be internal extensions or external telephone
numbers. If the destination is an external number, enter outside line
access code (e.g. 9) + telephone number +
#. The system will allow
a 32 digit maximum
•
Timer (Call Forward No Answer Timer) – Enter the number of
seconds (08 - 60). The telephone should ring before forwarding the
call.
•
Call Forward Pass Code – A four-digit Call Forward pass code may
be preset by the System Administrator. This will allow one station to
activate the call forward setting for another. Users must enter the Call
Forward pass code for the station to be forwarded
Program Call
Forward via
Enterprise
Manager
To program call forward button destination using Enterprise Manager:
1. Login to Enterprise Manager
10. Select System > Call Forward
11. Click the check box for the SCF number
12. Select Call Type and click the Edit icon
13. In the “Call Forward” window, enter the first destination to which the call
should forward (up to 32 digits, default is null)
14. Enter the number for Destination 2.
15. Click OK Button
16. Click Save icon to save settings
Example: Call
Forward to
extension
To set Call Forward Busy/No Answer from a base station:
Base station extension button + #6041 + XXXX# + 10
1. Press your extension button
17. Enter access code #6041
18. Enter internal extension to forward to XXXX#
19. Enter ring time in seconds (e.g. 10) before call forwards
Example: Call
Forward to
outside line
To set Call Forward Busy/No Answer for a different extension, and forward calls to
an outside telephone number:
Extension button + #6042 + YYYY + 1111 + # + 9 + (1-949-555-0000)
+ # + 08
1. Press your extension button
20. Enter access code #6042
21. Other telephone’s extension number YYYY
To Next Page
Loading...
