IPedge UG 01/13 TOSHIBA 19
The Basics 2
This chapter reviews the basic operations of the IP5000-series telephones.
The instructions apply to all telephone models, except when noted otherwise.
Customizing Your
Telephone
Volume Control
To adjust the Handset Volume
Press the Vol
up to increase volume and Vol dn to decrease volume during
the call. When you hang up, the volume returns to the default setting.
To adjust the speaker volume for internal/external calls and background
music
1. Press Spkr
2. Press an extension button - you hear dial tone
3. Press Vol
up to increase volume and Vol dn to decrease volume. This
volume setting applies to all calls until changed
To adjust Ring Tone, Hands free Answerback and Speaker Off-hook Call
Announce
Make sure the telephone is idle and the handset is on-hook. Press the Vol
up
to increase volume and Vol dn to decrease volume. This adjusts volume for
your telephone’s ring tone, Hands free Answerback and Speaker Off-hook
Call Announce simultaneously.
To adjust handset Beep Tone
1. With the handset off-hook, dial the Beep Tone Adjustment Code #6101
(default code). A beep will be heard
2. Press Vol
up or Vol dn to reach the desired level
To Next Page
Loading...
