IPedge
Feature Operations
IPedge UG 01/13 TOSHIBA 63
Login/Logout Login and Logout is controlled by the Login key assigned to the agent phone.
The Log status is displayed on the Login key as shown below
•Login - Key is On Steady
• Logout - Key is Off
The Login/Logout feature is applied to the call which terminates to UCD pilot
only. Therefore, the call can terminate to agent Prime or Phantom PDN
directly even if the agent is in Logout state. Also, Login/Logout can be
activated by an access code. The default numbering plan is shown below.
Access Code Feature
#6061 Login - from Agent Station
#6062 Logout - from Agent Station
#6161
+ DN + # Login - Agent Station (DN) from another station
#6162
+ DN + # Logout – Agent Station (DN) from another sta-
tion
where DN = the Directory number of the agent station.
To Next Page
Loading...
