IPedge
IPMobility Application
86 TOSHIBA
IPedge UG 01/13
calls.
Call-Thru
After a destination number is dialed, IPMobility sends a data signal to the
IPedge system over the Internet. IPMobility then dials a specific number into
IPedge. The system dials the destination number and connects both calls.
Figure 1 – IPMobility Application Workflow
Before You Begin Users will need to obtain some information before using IPMobility:
• IP Address of Voicemail - IP address of the IPedge server
• Mailbox number - usually your extension
• Voicemail Password
• Direct Inward Dialing (DID) Number. This is the number for the
IPedge system
Download IPMobility
Application
The IPMobility app requires internet access to the host IPedge.
Note: Mobile devices require a data plan with an option to enable Wi-Fi
access for locations with poor cell network service. The IPMobility
App must be installed on the mobile device.
The IPMobility application may be downloaded from Google Play or the
iTunes™ App Store.
For Android: https://play.google.com/store/apps
For iPhone: http://www.apple.com/itunes/
Android Users
Before you begin, enable the “Unknown Sources” feature in Application
Settings. To do this:
To Next Page
Loading...
