IPedge
Preferences
136 TOSHIBA
IPedge UG 01/13
To Add or Change a Static Info Field:
• Field Name – Select from the pre-defined list of fields or create you own
field name. This name must match exactly the information field where the
information is held.
• Description – Enter any description you desire to mark this field.
• Field Type – Each field can be selected to be either a fixed parameter (1
line) or long text (multiple lines) fields.
• Priority – The field priority selected will mark the color of the icon attached
to the call.
• User Can Edit Field – This determines if this field can be changed or
fixed.
• Action Button – A button can be defined to use trigger user defined
Action. The Action Name must match exactly the name of the Action
defined in User Defined Actions.
• Dynamic Info Fields – Allows the choice of when these fields will show.
provides a large set of fields, which are automatically filled in based upon
the call information. Dynamic fields are fields set by another application
and are not pre-defined in.
MS Outlook Integration Call Manager is specifically designed to work in concert with Microsoft's
Outlook contact management program.
• Initial Setup – Click the Configuration button to reach the Outlook
Preferences screen with the following options:
• Enable Outlook Integration – This main option enables/disables the
Outlook Integration features. This must be checked for any Outlook
features to work. If you're not using Outlook, then this should be disabled.
• Home Area Code – Enter your home area code. This is used for dialing
local calls when the area code needs to be stripped from the dialing.
To Next Page
Loading...
