IPedge
IPMobility Application
IPedge UG 01/13 TOSHIBA 89
Note: If not already provided to you, see your system administrator for the DID
number.
6. Tap to select Dial Using callback or Dial Using Call-thru.
• Dial Using callback will require the user to confirm each incoming or
outgoing call by pressing 1 or #
• Dial Using Call-thru will automatically make the call without any user
confirmation (like a normal call)
Test the Application 1. After launching the app on your mobile device, make a call to a telephone with
Caller ID capability.
2. Verify that the IPedge Caller ID or DID is displayed (not the mobile phone
number.)
Mailbox Setup
Wizard
The setup wizard will guide the user through the voice mailbox setup process.
1. Tap My Info.
To Next Page
Loading...
