28
Getting Started
Using the computer for the first time
2 Remove the RF mini USB dongle cover, located on the back of
the computer on the lower left corner.
(Sample Illustration) RF mini USB dongle cover
3 Insert the mini USB dongle into the mini USB port.
4 Insert batteries in the keyboard.
5 Insert batteries in the mouse.
6 Ensure that both mouse and keyboard are switched to the "ON"
position. Your wireless keyboard and mouse are now
connected.
If there is no response from the wireless devices, press the connect
buttons on the keyboard, mouse, and RF mini USB dongle for a few
seconds, while turning ON the computer.
Please refer to the illustrations above for location of covers and
buttons.
Turning on the power
To turn on the computer:
1 Make sure the power is properly connected and ready.
2 Check to ensure that all drives and slots are empty. Press and
release the power button. The ON/OFF light glows white.
(Sample Illustration) Turning on the power
The pre-installed operating system will load automatically.
To Next Page
Loading...
Need help?
General