A.2 Power Module Specification
Unified Controller nv series type2 light Controller Unit Instruction Manual
91
CAUTION
Take at least one second from power-off to
subsequent power-on.
IF this interval is shortened, the equipment may not start
properly or malfunction.
CAUTION
If the power supply is cut off due to an output error
(e.g. overcurrent), turn off the power, remove the
cause of error, and turn on the power again.
Take at least 1 minute to turn on the power again;
otherwise, the module may not start properly.
CAUTION
Precautions for using the power module
・
This power module is dedicated to unified controller nv
series type1 light and type2 light controllers. Do not use
it independently for any other purposes.
・
Take at least one second from power-off to subsequent
power-on; otherwise, the module may not start properly
or malfunction.
Mandatory
Mandatory
Mandatory
To Next Page
Loading...
