Toshiba nv Series - A.10 Cable; A.11 Blank Module

Appendix A Specification
6F8C1575
102
Table A-17 Intelligent Terminal block
Model Outline
Weight
(Or
less)
USCB1 For SBIF1/SBIF2 (vertical DIN rail) 300g
USCB2 For SBIF1/SBIF2 (horizontal DIN rail) 300g
USCB3 For SSIF1 (horizontal DIN rail) 300g
UTBA1 For analog module (vertical DIN rail) 750g
UTBA2 For SAI02, SAI03, SRT01 and SAO02 (vertical DIN rail) 750g
UTBA3 For SAI01, SAI06 and SDA01 (vertical DIN rail) 750g
UTBA6 For SAI06 and SAO06 (vertical DIN rail) 750g
UTBA61 For SAI06, SAO06 and SPI06 (vertical DIN rail) 750g
UTBD1 For digital module (one module) (vertical DIN rail) 900g
UTRC1 For digital module (two modules) (vertical DIN rail) 800g
UABU1 For analog module (horizontal DIN rail) 300g
UABU3 For SAI06, SAO06 and SPI06 (horizontal DIN rail) 300g
UDBU1 For digital module (horizontal DIN rail) 250g
UTBA7 For analog input (F series) (vertical DIN rail) 1.5kg
UTBA8 For analog output (F series) (vertical DIN rail) 1.5kg
UDBU2 For digital module (F series) (vertical DIN rail) 300g
A.10 Cable
Table A-18 Applicable cable
Model Outline
1 ZCS010A***1 Serial bus trunk cable
A.11 Blank Module
Table A-19 Blank module
Model Outline
1 BPM21
Use for extend module slot
2 BPM22
Use for controller module slot
3 BPM2P
Use for power module slot