Appendix D Migration Method
6F8C1575
126
This chapter explains the method of migrate to the type2 light controller by the system of Integrated
Controller V series model 2000 L2PU22 (herein after called the”L2 controller”). About the L2 controller
modules, refer to 6F8C0883 「Loop Controller L2 User's Manual - Basic Hardware」. About the details of
TC-net I/O modules, refer to 6F8C1240 「High-speed Serial I/O System TC-net I/O Instruction Manual」
and 6F8C1381 「Industrial TC-net I/O System Instruction Manual」.Serial PI/O modules, refer to
6F8C0779 「Serial PI/O System Intelligent PI/O Instruction Manual」.
D.1 Migration Method
Method that migrate from the the existing system of L2 controller (Figure D-1) to the system of
type2 light controller (Figure D-2) is listed as below.
Figure D-1 The existing system of L2 controller
type2 light
controller
Serial Bus 1
Serial Bus 2
Serial Bus 3
SBIF1/2
SBIF1/2
SBIF1/2
SBIF1/2
SBIF1/2
SBIF1/2
SIO
SIO
SIO
nV‐ToolOIS‐DS
Ch A
Ch B
Ethernet LAN Double
Duplex Tracking
L2PU22: Controller module
FN611:Ethernet module
IF619: Duplex module
L2 controller