Appendix A Specification
6F8C1575
96
Table A-8 TC-net I/O module
Model
Outline
I/O
points
Channel
insulation
1 DI934 24VDC 5 mA digital filter 32 None
2 DI934I 24VDC 4mA digital filter 32 None
3 DI935 24VDC 4 mA digital filter 64 None
4 DO934 24VDC 100 mA, sink output 32 None
5 DO935 24VDC 50mA, sink output 64 None
6 AI918F 0-5V, 16bit 10ms cycle 8 Provided
7 AI919 0-5V, 14bit 50ms cycle or less 16 None
8 AI929D 0~5V, 14bit 50ms or less frequency, with
distributor
16 None
9 AI969 mV/V input 16 Provided
10 TC919 TC(Type B, R, S, J, K, T, E)
(Type and range can be set individually for
each point.)
16 Provided
11 RT918C Resistance bulb Pt100 or JPt100
(Type and range can be set individually for
each point.)
8 None
12 RT918 Resistance bulb Pt100 or JPt100
(Type and range can be set individually for
each point.)
8 Provided
13 AO928 0~20mA 14bit 1msec or less response 8 Provided
14 PI948 Voltmeter pulse 8 None
15 FL911 FL-net communication module
－
－
16 MD911 MODBUS communication module
－
－
17 LP918B LP analog output module (for duplex
configuration)
AI: 12ch, AO: 8ch, DI: 8 (non-insulated), DO:
8 (non-insulated)
12/8 None
18 LP928B LP pulse output module (for duplex
configuration)
AI: 12ch, PO: 8ch, DI: 8 (non-insulated), DO:
8 (non-insulated)
12/8 None
19 AI959B Analog input for signal conditioner (for duplex
configuration)
16 None
20 AO969B Analog output for signal conditioner (for
duplex configuration)
16 None
21 AI9A9B 1-5 V analog input (for duplex configuration) 16 None
22 AO9A9B 4-20 mA analog output (for duplex
configuration)
16 None
23 PO919 Pulse output (width output/column output/
high- speed/low-speed)
16 None
To Next Page
Loading...
