Toshiba nv Series - A.9 List of Current Consumptions and Weights by Module

A.8 List of Current Consumptions and Weights by Module
Unified Controller nv series type2 light Controller Unit Instruction Manual
99
A.9 List of Current Consumptions and Weights by Module
Table A-13 Module current consumptions and weights (when installed in controller unit)
Module name Model Outline
5 V internal
current
consumption
(max)
Weight
(Or
less)
Controller
module
PUM21 type2 light 2.5A 500g
Serial bus interface
module
SBM21 SBIF adapter (2-bus) 1A 300g
Power Module PS693 100-240VAC input power 7A (output) 600g
Base Unit BUM22 Base unit for installing - 1000g
Table A-14 TC-net I/O base unit
Model Outline
Weight
(Or less)
BU901 SA911
dedicated base unit
220g
BU902/BU902A
Digital filter terminal block base unit
450g
BU903/BU903A
Analog module terminal block base unit
450g
BU904/BU904A
Thermocouple input dedicated terminal block base unit
450g
BU905
Connector type base unit
250g
BU928F Horizontal base unit for LP900 series 6Kg
BU929F Horizontal base unit 6Kg
UTBA73 Base unit for output of AI959B input signal conditioner 1.5kg
UTBA83 Base unit for output of AO969B output signal
conditioner
1.5kg
BU927F Horizontal base unit 6kg
BU90A Base unit for PA912
(PA912 of accessories)
250g
Note
BU902A, BU903A, BU904A are the modules used for common bar or short bar for addition.
Other specifications are the same as the modules without `A'. The modules without `A' cannot
add the common bar or short bar to modules.