Toshiba nv Series - Page 32

Chapter 1 On Installing type2 light Controllers
6F8C1575
14
■ Configuration with intelligent I/O connection
An SBIF adapter is installed and inserted in the extended slot in the configuration with
the intelligent I/O connection.
(1) Intelligent I/O connection in a single controller configuration
Figure 1-8 Intelligent I/O single connection configuration
Secondary CPU module slot
Secondary extended slot
Secondary power module sl
ot
I/O bus
cable (max
5m)
Terminal connector
Loop A
Loop B

Junction terminal
block / Format BL7 
Termination
resistance
SBIF1/2
installation
(one unit)
Serial bus
cable (max
30m)
PI/O
module
(max 14
units)
Max 15 units
With termination
resistance
Same as
the
left-hand
figure
Loop
B

Loop
A