Toshiba nv Series - Page 42

Chapter 2 Installing/Uninstalling
6F8C1575
24
CAUTION
Install the power module, controller module,
system bus module, TC-net I / O module to the
base unit.
Failure to observe it may cause an electric shock,
an
injury and a trouble.
Do not use it alone or for other purposes.
CAUTION
Turn off the power before installing and uninstalling
the module, the base unit and the terminal block.
Failure to observe it may cause an electric shock,
malfunction and a trouble.
CAUTION
Do not put foreign matters such as wire scrap in
the
module and the unit.
They may cause a fire, a trouble and malfunction.
CAUTION
To connect the connector and cable and install the
module to the base unit, press them in until they
click and fix them with screws firmly.
Insufficient screwing may cause a trouble and
malfunction
due to vibration.
CAUTION
Beware of static electricity when handling the
modules and units.
Parts may be damaged due to static electricity.
CAUTION
Before touching the device or module, touch a
grounded metal to discharge the static electricity of
your body.
They may cause a fire, a trouble and malfunction.
Mandatory

Mandatory

Mandatory

Mandatory

Mandatory

Prohibited
Prohibited